Royal Products 43500 Replacement Serrated Jaws Set To Fit Compact And Combo Bar Puller

Royal Products 43500 Replacement Serrated Jaws Set To Fit Compact And Combo Bar Puller Reviews

Other Picture

CNC Bar Pullers - Lathe Tools Type: Serrated Jaw Grip Range: 1/8-4 Shank Diameter: 1.0 In., 1 Square Shank Size: 1

Visit Store Now !!

Detail Products

• Royal Products 43505 Replacement Spring Finger Set To Fit Compact And Combo Bar Puller

Detail Reviews

Jul 31, 2011 22:46:24

1-1/4"-8 TPI RH Insert

1-1/4"-8 TPI RH Insert Reviews

Other Picture

1-1/4"-8 TPI RH Insert Feature

• Adapts any NOVA chuck to almost any lathe spindle at low cost.
• The insert/adaptor versions of NOVA chucks all use the same insert/adaptor system

Teknatool uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from the Compac). The insert has different lathe spindle thread sizes internally, and simply screws into the back of your Nova chucks. Once the insert is in place, you can then put your chuck onto your lathe.

Visit Store Now !!

Detail Products

• TEKNATOOL SUPERNOVA 2 CHUCK W/2" JAWS & WOODWORM SCREW (SUPERNOVA2)
• PSI Woodworking LA11418 Headstock Spindle Adapter (1-1/4-Inch-by-8tpi to 1-Inch-by-8tpi Chuck)
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• JET 708359 JWL-1642EVS 16-Inch Swing 42-Inch between Centers 1-1/2 Horsepower Electronic Variable Speed Woodworking Lathe, 115-Volt 1 Phase
• Supernova 2 Chuck Kit with 2" Jaws, 4" Powergrip Jaws, Woodworm Screw

Detail Reviews

Jul 30, 2011 20:07:04

PSI Woodworking DLGULP Big Gulp Ultimate Wood Lathe Dust Hood

PSI Woodworking DLGULP Big Gulp Ultimate Wood Lathe Dust Hood Reviews

Other Picture

PSI Woodworking DLGULP Big Gulp Ultimate Wood Lathe Dust Hood Feature

• Attaches to all lathes - mini or midi even with an extension bed, plus standard size lathes
• Huge 13-by-16-inch hood with a 4-inch intake port to collect your turning chips and dust
• Mounts easily and can be simply positioned for any task
• Moves horizontally with over a 40-inch span without remounting
• A must for every turner

Collecting dust while working on a large lathe while positioning & repositioning a dust collection device can be a hassle. The PSI Ultimate Lathe Hood solves that problem with ease.Attaches to all lathes - mini or midi even with an extension bed, plus standard size lathesHuge 13-by-16-inch hood with a 4-inch intake port to collect your turning chips and dustMounts easily and can be simply positioned for any taskMoves horizontally with over a 40-inch span without remountingA must for every turner

Visit Store Now !!

Detail Products

• Woodstock W1044 4-to-2-1/2-Inch Reducer
• PSI Woodworking DBGULP Big Gulp Dust Hood
• PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• PSI Woodworking LCBT4 4 Piece Bowl Turning Lathe Chisel Set

Detail Reviews

Jul 29, 2011 08:44:07

Bowl Rest, Large

Bowl Rest, Large Reviews

Other Picture

Bowl Rest, Large Feature

• Curved tool rest for bowls
• Interference-free hand movement
• Solid steel construction
• Part of the Woodcraft tool rest modular system
• Save money with 2 rests and 1 post

Tired of using a tool rest thats too short, too soft and designed by an engineer that has no idea what its like to even use a lathe? If youd like to spend more time turning instead of tuning, the Woodcraft lathe tool rest system is for you. The solid steel bowl rests provide a stable curve for turning and a flat top for vibration-free scraping. Use the large bowl rest for bowls up to approximately 14" diameter. Woodcraft tool rests are modular in design to save you money (buy two rests and one post), and permit you to use your rests on more than one lathe. Select the proper diameter post for your lathe and a tool rest in a length or shape to meet your needs. Note: tool rest lengths include threads. Posts screw into rests and can easily be removed and attached to a different accessory.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 28, 2011 06:08:03

Taig Die Holder

Taig Die Holder Reviews

Other Picture

Taig Die Holder Feature

• Brand new
• Die holder for tailstock (will accept 13/16" and 1.00" button dies)
• A2Z is an Authorized Taig Dealer

Die holder for tailstock (will accept 13/16" and 1.00" button dies)

Visit Store Now !!

Detail Products

Detail Reviews

Jul 26, 2011 12:27:07

6" Vacuum Head 1-1/4" x 8 TPI

6" Vacuum Head 1-1/4" x 8 TPI Reviews

Other Picture

6" Vacuum Head 1-1/4" x 8 TPI Feature

• 1-1/4" x 8 TPI
• 6" vacuum head only
• For Hold Fast Vacuum Chucking System

The 6" Vacuum Chuck Head can hold convex or concave shaped workpieces. Made of glass filled nylon with an aluminum mounting adapter.

Visit Store Now !!

Detail Products

• Hold Fast 3" Vacuum Chuck Kit 1-1/4" x 8 TPI

Detail Reviews

Jul 25, 2011 16:25:28

1/2'' Drill Chuck (Morse Tapers Sold Separately)

1/2'' Drill Chuck (Morse Tapers Sold Separately) Reviews

Other Picture

1/2" drill chuck for lathe is compatible with two choices of morse tapers. Use it with either the #1 Morse taper (Rockler #20785) or #2 Morse taper (Rockler #20793) to assemble as shown. Key is supplied with chuck. This assembly is used on a lathe to hold a mandrel for turning wood pens and pencils.

Visit Store Now !!

Detail Products

• #2 Morse taper for Drill Chuck (Chuck Sold Separately)
• #1 Morse taper for Drill Chuck (Chuck Sold Separately)
• PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• Wolverine Grinding Jig

Detail Reviews

Jul 24, 2011 15:18:04

StrongHold - No Adapter

StrongHold - No Adapter Reviews

Other Picture

StrongHold - No Adapter Feature

• Quality materials
• Nickel plated body
• Hardened base jaws
• Manganese phosphate coated scroll
• Single-Hand Key Operation

The Stronghold Chuck is operated by a key. Key operation provides two major advantages: one handed operation, solid holding power, 5 to 1 ratio assures powerful clamping and the body diameter of this chuck is 4 1/2.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 23, 2011 13:39:04

Rear mount cut-off tool holder

Rear mount cut-off tool holder Reviews

Other Picture

Rear mount cut-off tool holder Feature

• Like using P/N 3002 cut-off tool with P/N 3016 rear mounting block but all in one piece
• Allows cut-off tool to be left on rear end of table where it is out of the way but ready for use
• Tool blade is held upside down to accommodate part rotation direction
• Includes .040 thick cutoff blade, mounting bolt and T-nut

If you always intend to mount your cut-off tool on the rear side of the part where it is out of the way and ready for use at all times, this accessory is a one-piece holder that takes the place of placing the P/N 3002 holder on top of the 3016 spacer, saving .00 in the process. The cutting tool is still placed in the holder upside down, and the wider base offers more support than the 3002/3016 combination; however, it can only be used on the back side of the part. Designed for use with Sherline tools only.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 22, 2011 06:58:04

Peachtree Woodworking 3/4 X 3/4 X 5 ACRYLIC PEN BLANK CAMO

Peachtree Woodworking 3/4 X 3/4 X 5 ACRYLIC PEN BLANK CAMO Reviews

Other Picture

Peachtree Woodworking 3/4 X 3/4 X 5 ACRYLIC PEN BLANK CAMO Feature

• Blanks measure 3/4" x 3/4" x 5"
• Turns and drill easily
• Polish to super high gloss, no top coat needed

These acrylic blanks are undrilled, 3/4" x 3/4" square x 5" long. The blanks are high density with great working properties and polish to a super high gloss. Acrylic blanks take a beautiful polish that gives the appearance of a liquid tube. No top coat finish is necessary.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 20, 2011 12:13:04

6" Vacuum Head 1" x 8 TPI

6" Vacuum Head 1" x 8 TPI Reviews

Other Picture

6" Vacuum Head 1" x 8 TPI Feature

• 1" x 8 TPI
• 6" vacuum head only
• For Hold Fast Vacuum Chucking System

The 6" Vacuum Chuck Head can hold convex or concave shaped workpieces. Made of glass filled nylon with an aluminum mounting adapter.

Visit Store Now !!

Detail Products

• Hold Fast 3" Vacuum Chuck Kit 1" x 8 TPI

Detail Reviews

Jul 19, 2011 14:33:03

#1 Spigot Jaws for ONEWAY Talon Chuck

#1 Spigot Jaws for ONEWAY Talon Chuck Reviews

Other Picture

#1 Spigot Jaws for ONEWAY Talon Chuck Feature

• Will grip round stock from 1/4" to 1-3/4"
• Expands into a dovetailed recess from 1" to 2-1/2"
• Fits OneWay Talon chuck

OneWay #1 Spigot Jaws are for use with OneWay Talon chuck. Designed for holding smaller projects the Spigot Jaws will grip round stock from 1/4" to 1-3/4" or expand into a dovetailed recess from 1" to 2-1/2".

Visit Store Now !!

Detail Products

• 1'' X 8 Tpi Insert for Oneway Talon Chuck System
• Oneway Talon Chuck System
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• PSI Woodworking Products TM32 1/2-Inch Diameter Drill Chuck with a 2 MT Mount
• MSA Safety Works 817893 Adjustable Faceshield

Detail Reviews

Jul 18, 2011 02:33:03

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool Reviews

Other Picture

Only 1/16' wide! Get a clean, sharp and accurate 90deg angle corner for delicate turnings. A must tool for any pen maker; for cutting perfect tenons on pen center bands.

Visit Store Now !!

Detail Products

• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center
• PSI Woodworking LCENTSS21 #2 MT with 5/8-Inch Crown Super Wood Lathe Drive Center
• The Frugal Woodturner: Make and Modify All the Tools and Equipment You Need
• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish

Detail Reviews

Jul 17, 2011 07:06:04

Milwaukee 48-66-4040 Chuck Key Holder

Milwaukee 48-66-4040 Chuck Key Holder Reviews

Other Picture

Milwaukee 48-66-4040 Chuck Key Holder Feature

• This Chuck Key Holder securely attaches chuck key to the cordset of your drill

Drill Chucks

Visit Store Now !!

Detail Products

• Milwaukee 48-66-3280 Chuck Key for Chucks 48-66-1360, 48-66-1370, and 48-66-1381
• Milwaukee 48-76-4008 Quik-Lok 8-Foot 3 Wire Grounded Cord
• Milwaukee 48-66-2110 Chuck Key for Chuck 48-66-5185
• Milwaukee 48-76-4108 Quik-Lok 8-Feet 3-Wire Grounded Cord with Twist Lock Plug
• Milwaukee 48-66-4080 Chuck Key Holder for Chuck Key 48-66-3200

Detail Reviews

Jul 16, 2011 08:25:05

PSI Woodworking LCENTLT2X MT #2 Wood Lathe Live Center

PSI Woodworking LCENTLT2X MT #2 Wood Lathe Live Center Reviews

Other Picture

PSI Woodworking LCENTLT2X MT #2 Wood Lathe Live Center Feature

• Live ball bearing tailstock center with cup and point
• Fits all # 2 MT Lathes.
• Beautifully finished
• Smooth running ball bearing
• Shipped in a stong wood box

Fine tuned live center for all lathes equipped with #2 MT tailstocks.Live ball bearing tailstock center with cup and pointFits all # 2 MT Lathes.Beautifully finishedSmooth running ball bearingShipped in a stong wood box

Visit Store Now !!

Detail Products

• PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• PSI Woodworking LCENTSS21 #2 MT with 5/8-Inch Crown Super Wood Lathe Drive Center
• PSI Woodworking L5818 Headstock Spindle Adapter (Shopsmith 5/8-Inch to 1-Inch 8tpi chuck)
• PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

Detail Reviews

Jul 14, 2011 09:59:04

6" Face Plate

6" Face Plate Reviews

Other Picture

6" Face Plate Feature

• 1" x 8 TPI

Rikon 6" faceplate

Visit Store Now !!

Detail Products

• PSI Woodworking LA341018 Headstock Spindle Adapter (3/4-Inch x 10tpi to 1-Inch x 8 tpi chuck)

Detail Reviews

Jul 13, 2011 14:00:04

1'-8 TPI Insert for Nova chucks

1'-8 TPI Insert for Nova chucks Reviews

Other Picture

Teknatool uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from the Compac). The insert has different lathe spindle thread sizes internally, and simply screws into the back of your Nova chucks. Once the insert is in place, you can then put your chuck onto your lathe.Adapts any NOVA chuck to almost any lathe spindle at low cost.The insert/adaptor versions of NOVA chucks all use the same insert/adaptor system

Visit Store Now !!

Detail Products

• TEKNATOOL SUPERNOVA 2 CHUCK W/2" JAWS & WOODWORM SCREW (SUPERNOVA2)
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• Cole Jaw Set
• PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center
• MSA Safety Works 817893 Adjustable Faceshield

Detail Reviews

Jul 12, 2011 15:02:06