1 1/4 - 8 TPI - STRONGHOLD CHUCK PACKAGE

1 1/4 - 8 TPI - STRONGHOLD CHUCK PACKAGE Reviews

Other Picture

1 1/4 - 8 TPI - STRONGHOLD CHUCK PACKAGE Feature

• powerful clamping (5:1 ratio)
• smooth key operation (single hand)
• large body doamter (4 1/2 inches),
• wide range of accessory jaws
• removeable insert for easy replacement

###############################################################################################################################################################################################################################################################

Visit Store Now !!

Detail Products

• PSI Woodworking LA11418 Headstock Spindle Adapter (1-1/4-Inch-by-8tpi to 1-Inch-by-8tpi Chuck)
• Ci0 Easy Finisher w/Easy Grip Handle
• Wolverine Grinding Jig
• Ci1 Easy Rougher w/Easy Grip Handle
• JET 708359 JWL-1642EVS 16-Inch Swing 42-Inch between Centers 1-1/2 Horsepower Electronic Variable Speed Woodworking Lathe, 115-Volt 1 Phase

Detail Reviews

Oct 18, 2011 04:49:03

Lathe Bit Centering Tool for Metal Hobby Lathe

Lathe Bit Centering Tool for Metal Hobby Lathe Reviews

Other Picture

Lathe Bit Centering Tool for Metal Hobby Lathe Feature

• Accurately align the tool cutting tip with center line of work piece
• Fast and accurate tool changes
• Made in USA
• Acrylic body will not mark workpiece or tool tip
• Better surface finishes are acheived when cutting height is properly set

Quickly set the cutting tool tip height relative to the workpiece center line. When machine is level the accuracy of the bubble vial in our tool is amazingly accurate. Made in the USA from acrylic.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 17, 2011 00:35:04

Cole Jaw Screw Chuck

Cole Jaw Screw Chuck Reviews

Other Picture

Cole Jaw Screw Chuck Feature

• RH thread
• 1-3/4" long

Screw Chuck for Cole Jaws (not shown). Use in the Nova chuck while the Cole Jaws are still attached! About 1-3/4" long. RH thread.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 14, 2011 07:10:04

LEARN TO TURN BY BARRY GROSS

LEARN TO TURN BY BARRY GROSS Reviews

Other Picture

LEARN TO TURN BY BARRY GROSS Feature

• How to select the lathe thats right for you
• All about turning tools and how to use them
• Basic woodshop set-up
• The nuts-and-bolts of sharpening, sanding and finishing
• 8 Step-by--Step projects.

Learn to Turn is a woodturning book for true beginners. If you have considered trying woodturning but have been intimidated by other books available on the subject-you will find artist and author Barry Gross puts the fun back into turning with this approachable and enjoyable guide. 8 step-by-step projects including: Pepper Mill, Ornamental Birdhouse, Simple Bowl, Vessel, Lidded Box and more.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 13, 2011 09:19:04

Powermatic 6294733 3520B Lathe Remote On-Off Switch

Powermatic 6294733 3520B Lathe Remote On-Off Switch Reviews

Other Picture

Powermatic 6294733 3520B Lathe Remote On-Off Switch Feature

• For 3520B Lathe

Includes Remote On/Off Switch for 3520B Lathe - 6294733

Visit Store Now !!

Detail Products

Detail Reviews

Sep 11, 2011 15:41:13

Makita 7634191 Chuck Key

Makita 7634191 Chuck Key Reviews

Other Picture

Makita 7634191 Chuck Key Feature

• Makita
• 7634191
• Chucks and Chuck Keys

Makita 7634191 Chuck KeyMakita 7634191 Chuck Key Features:; Used to tighten and loosen drill chuck; Use with 6002D, 6010D, 6012HD, 6093D, 6071D, 6073D, and 6041D; Carded

Visit Store Now !!

Detail Products

• Pwr+ 9.6v Ni-cd 1300mah Makita 9000 9033 192696-2 632007-4 Battery Replacement (Makita Equivalent)
• Sony BDP-S360 1080p Blu-ray Disc Player

Detail Reviews

Sep 10, 2011 11:29:05

Bison 7-878-128 12" D-1-8 Back Plate

Bison 7-878-128 12" D-1-8 Back Plate Reviews

Other Picture

Bison 7-878-128 12" D-1-8 Back Plate Feature

• Chuck Diameter: 12"
• Spindle: D-1-8

For Bison Lathe Chucks

Visit Store Now !!

Detail Products

Detail Reviews

Sep 07, 2011 19:32:15

Royal Products 43302 1/8" to 2-1/4" Bar Capacity Compact Bar Puller With 3/4" Square Shank

Royal Products 43302 1/8" to 2-1/4" Bar Capacity Compact Bar Puller With 3/4" Square Shank Reviews

Other Picture

Royal Products 43302 1/8" to 2-1/4" Bar Capacity Compact Bar Puller With 3/4" Square Shank Feature

• Great for use with small CNC lathes, compact design minimizes tool interference
• Flexible heat-treated steel fingers provide strong gripping force
• All parts subject to wear are hardened for strength and durability
• 1 year warranty against failure due to manufacturing defects

Bar pullers provide a cost effective way to automate CNC lathes. Unit is very easy to use. Simply set gap between jaws 1⁄8" smaller than stock size. As the bar puller slides over the bar along the x-axis, the fingers flex to provide the gripping force. The turret then retracts along the z axis, pulling the bar out to the desired position. Includes one set of serrated jaws and one blank spindle bushing. Smooth jaws are available for softer materials.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 06, 2011 12:08:05

8" Economy P290 3-Jaw Univ Chuck

8" Economy P290 3-Jaw Univ Chuck Reviews

Other Picture

8" Economy P290 3-Jaw Univ Chuck Feature

• Size: 8"
• Thru hole in center: 2.55"
• Type: P290 (2 piece jaws - top is reversible)

Semi-Steel. Plain back. Includes key. Style P290 chucks include master jaws with hard reversible top jaws.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 05, 2011 16:01:04

Nova Universal Wrench

Nova Universal Wrench Reviews

Other Picture

Nova Universal Wrench Feature

• Designed specifically for Teknatool lathe products
• Fits Teknatool SuperNova, G3, Midi and Titan chucks

This must-have all-in-one universal wrench is designed specifically for Teknatool lathe products. Use this wrench for the fastest and easiest way to mount, demount, tighten, loosen, set-up and adjust Teknatool SuperNova, G3, Midi and Titan chucks, all Nova Chuck Inserts, 80mm (3) faceplates and Nova Ornamental Turner.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 04, 2011 06:21:04

Bison 7-804-1043 10" L-1 3-Jaw Univ Chuck

Bison 7-804-1043 10" L-1 3-Jaw Univ Chuck Reviews

Other Picture

Bison 7-804-1043 10" L-1 3-Jaw Univ Chuck Feature

• Chuck Diameter: 10"
• To fit Spindle: L-1
• Mounting Dimension: 4 1/8"

2 piece reversible jaws. For "L" Long Taper Spindles. Mounting dimension of L-type spindles is the large diameter of spindle taper.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 01, 2011 20:47:04

Taig Radius Turner

Taig Radius Turner Reviews

Other Picture

Taig Radius Turner Feature

• Brand new
• Radius Turner, swings Tool Bit in arc
• A2Z is an Authorized Taig Dealer

Radius Turner, swings Tool Bit in arc

Visit Store Now !!

Detail Products

• Taig Drill Chuck 1/2"

Detail Reviews

Aug 31, 2011 00:56:04

Bison 7-860-0600 6" 3 Jaw Tailstock Chuck-5MT

Bison 7-860-0600 6" 3 Jaw Tailstock Chuck-5MT Reviews

Other Picture

Bison 7-860-0600 6" 3 Jaw Tailstock Chuck-5MT Feature

• Size: 6"
• Morse Taper: 5

A rotating chuck for tailstock use. Steel body. Sealed ball bearings. Hardened and ground scroll & pinions. Includes wrench, inside jaws, outside jaws.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 30, 2011 05:23:06

Vertical milling column with stepper motor mounts ready for CNC

Vertical milling column with stepper motor mounts ready for CNC Reviews

Other Picture

Vertical milling column with stepper motor mounts ready for CNC Feature

• Turns lathe into a milling machine or drill press in less than 30 seconds
• Same column as above but with NEMA 23 frame stepper motor mount ready for CNC

The vertical milling column turns a Sherline lathe into a light-duty mill in less than 30 seconds. This column has a NEMA 23 stepper motor mount in place of the handwheel ready to accept the application of a stepper motor and CNC control. (Motor and control not included.) To install, just release the set screw that holds the lathe headstock in place and lift it off its pin. Set the column base over the same pin and secure it with its set screw. Now place the headstock/motor/speed control unit over the pin on the column saddle (with the alignment key in place to keep it square) and tighten the headstock set screw. Now you have a vertical axis, called the Z-axis that gives you all the functions of a vertical milling machine. You can do drilling, milling, boring, fly cuttingeverything you could do on a mill, except that you are working with a smaller table. If your parts are small, this may be all you ever need as far is milling capacity. Should you find you eventually need more milling capacity, you can purchase just a mill XY base and use this column and your lathe drive unit to make a complete mill. Includes standard 1-5/8 laser engraved handwheel with ball bearing thrust. (If using on a 4400-series lathe with adjustable zero handwheels, see P/N 3480)

Visit Store Now !!

Detail Products

Detail Reviews

Aug 28, 2011 17:21:28

Bison 7-803-0835 8" D-1-5 3-Jaw Univ Chuck

Bison 7-803-0835 8" D-1-5 3-Jaw Univ Chuck Reviews

Other Picture

Bison 7-803-0835 8" D-1-5 3-Jaw Univ Chuck Feature

• Chuck Diameter: 8"
• To fit Spindle: D-1-5
• Mounting Dimension: 2 1/16"

2 Piece reversible jaws. For "D"Cam-Lock Spindles. Mounting Dimension on D-Type spindles is from the center of spindle to center of pin

Visit Store Now !!

Detail Products

Detail Reviews

Aug 27, 2011 16:09:04

OneWay Bowl Steady Clamp Block, Nova DVR

OneWay Bowl Steady Clamp Block, Nova DVR Reviews

Other Picture

OneWay Bowl Steady Clamp Block, Nova DVR Feature

• The Bowl Steady also increases safety
• Fingers can be removed from the bowl or platter being turned
• Each model has a clamp block specific to that manufacturer's lathes.

The OneWay Bowl Steady Rest is designed to reduce vibration at the rim of a bowl or platter, thus making turning safer and easier. Even the best lathes cannot stop vibration inherent in the wood, caused by wood flexing. The Bowl Steadys neoprene, ball-bearing wheels reduce vibration, allowing smoother finished projects. Adjustment is easy, just align with the lathes center, squeeze the scissors-like tension arms and tighten down on the wing-nut.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 26, 2011 17:48:07

Grizzly H3405 Spur Center - 4 Spurs - MT1

Grizzly H3405 Spur Center - 4 Spurs - MT1 Reviews

Other Picture

Offset spurs reduce splitting. Value priced!

Visit Store Now !!

Detail Products

• Grizzly H3403 Cupped Live Center for Wood Lathe - MT1
• Grizzly H3412 Cast Iron Faceplate - 4" x 3/4" x 16 TPI
• #1 Morse Taper Live Tail Center
• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish
• PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center

Detail Reviews

Aug 25, 2011 15:08:03